2018 – what a year!

We had set ourselves a lot of goals – and achieved a lot! Mobility goes Additive has picked up speed in its second year!

  • We did it! – MgA has a home! Just in time for the Annual Meeting 2018 we opened our office in the Marienpark Berlin!
  • The third and biggest Annual Meeting 2018 took place on 26.09.2018 – we remember this day very succinctly and hope we could inspire you for our network. Thank you for all your contributions, a danced night – it’s been great to have you here!
  • No way too far! Through approx. 50 presentations and keynotes at home and abroad as well as user-specific events, we were able to successfully introduce the industrial AM to new user groups, e.g. in Shanghai, St. Louis, IN(3D)USTRY Barcelona, formnext, Singapore, Forum Deutscher Mittelstand, at the EU Commission.
  • Our working groups have developed excellently and present concrete results – here are the latest highlights:
    • “Education”: Petition with tangible to-do’s for the training of young people compiled,
    • With its focus groups “Materials” has defined the first key areas of work  and thus lays the foundations for industrial materials in AM,
    • “RAILiability”: Kick-off workshop at fromnext to address the special requirements of the railways as a closed working groups.

Much has been achieved, but it still lies ahead a lot of us to bring additive manufacturing to industrial maturity.

In 2019, we will focus even more on users, especially small and medium-sized enterprises, and our working groups, as well as on the targeted Europe-wide orientation – more on this in our January Newsletter! The office will close from 24.12.2018 to 04.01.2019 to take a deep breather for what is ahead in the new year.

We wish you, your colleagues and your families a wonderful celebration, magical holidays and a good start into the new year!

Warm greetings,
Your team from Mobility goes Additive e.V.

2018 – was für ein Jahr!

Wir hatten uns viel vorgenommen – und haben viel geschafft! Mobility goes Additive hat im zweiten Jahr Fahrt aufgenommen!

Mit über 90 Mitgliedern können wir mit Stolz sagen: WIR sind das größte und führende Netzwerk für industrielle additive Fertigung!

  • Geschafft – MgA hat ein Zuhause! Rechtzeitig zum Annual Meeting 2018 konnten wir auch unsere Geschäftsstelle im Marienpark eröffnen!
  • Das dritte und bislang größte Annual Meeting 2018 fand am 26.09.2018 statt – wir haben diesen Tag noch sehr prägnant in Erinnerung und hoffen, wir konnten auch Euch inspirieren und für unser Netzwerk begeistern. Danke für alle Beiträge, eine duchtanzte Nacht und schön, dass Ihr da wart! 
  • Kein Weg zu weit! Durch ca. 50 Präsentationen und Keynotes im In- und Ausland, sowie User-spezifischen Events konnten wir das industrielle AM neuen Nutzergruppen erfolgreich näherbringen, z.B. in Shanghai, St. Louis, IN(3D)USTRY Barcelona, formnext, Singapur, Forum Deutscher Mittelstand, bei der EU Kommission.
  • Unsere Arbeitsgruppen haben sich prima weiterentwickelt.
    • „Education“: Petition mit handfesten To-Do’s zur Nachwuchsausbildungverfasst,
    • „Materials“ hat mit seinen Fokusgruppen erste Arbeitsschwerpunkte definiert und legt damit die Grundlagen für industrielle Werkstoffe im AM,
    • „RAILiability“: Kick-Off Workshop auf der fromnext, um sich als geschlossene Arbeitsgruppe den speziellen Anforderungen der Bahnen zu widmen.

Viel geschafft, aber es liegt noch viel vor uns, um die additive Fertigung zur industriellen Reife zu führen.

In 2019 werden wir uns noch stärker auf Anwender, vor allem aus dem Mittelstand, und unsere Arbitsgruppen fokussieren sowie die gezielte europaweite Ausrichtung ansteuern – mehr dazu im Januar-Newsletter!
Um vor dem neuen Jahr einmal tief durchzuschnaufen, schließt die Geschäftsstelle vom 24.12.2018 bis 04.01.2019.

Euch, Euren Kollegen und Familien wünschen wir ein wundervolles Fest, zauberhafte Feiertage und guten Start ins neue Jahr!

Seid herzlich gegrüßt,
Euer Team von Mobility goes Additive e.V.

14.03.-15.03. 2019 – AM Forum Berlin

For the 3rd time, the Additive Manufacturing Forum will take place in the Berlin Estrel. This year again, MgA as a foundation partner will support the leading AM conference & exhibition.

13.03.2019 – Women in AM

Following the very successful first AM Ladies Lunch in 2018, Mobility goes Additive e.V. in cooperation with IPM AG invites to a meeting of female specialists and executives – to the European Summit for Women in AM.
The aim is to support the networking of women in specialist and management positions in the additive world, to inflame more women for the topic and thus to open up new potential for the future technology of additive manufacturing.

13.03.2019 – Women in AM

Nach dem sehr erfolgreichen ersten AM Ladies Lunch 2018 lädt Mobility goes Additive e.V. in Zusammenarbeit mit der IPM AG zu einem Treffen von weiblichen Fach- und Führungskräften ein – zum European Summit for Women in AM.
Ziel ist es, die Vernetzung von Frauen in Fach- und Führungspositionen in der additiven Welt zu unterstützen, mehr Frauen für das Thema zu begeistern und damit neue Potenziale für die Zukunftstechnologie der additiven Fertigung zu erschließen.

05.03.2019 – ETT 2019

Anfang März findet in St. Valentin (AT) die Ersatzteiltagung ETT 2019, Österreichs größte Plattform für Ersatzteillogistik, After Sales und Services statt.

05.03.2019 – ETT 2019

At the beginning of March the spare parts conference Ersatzteiltagung ETT 2019, Austria’s largest platform for spare parts logistics, after sales and services, will take place in St. Valentin (AT).

18.-19.02.2019 – Rethink! SMPS Europe 2019

Die Rethink! SPMS Europe 2019 in Berlin ist die führende Strategic Smart Manufacturing Summit für Produktionsleiter und Betriebsleiter, um interaktiv die Zukunft von Smart Factories, fortschrittliche Produktionsstrategien, Fabrikautomatisierung, organisatorische Veränderungen, Datenmanagement, vorausschauende Instandhaltung, Robotik, Kostensenkung, Lean & Operational Excellence, Industry 4.0 und Workforce 4.0. zu diskutieren, Vortrag von Stefanie Brickwede.

18.-19.02.2019 – Rethink! SMPS Europe 2019

The Rethink! SPMS Europe 2019 in Berlin is the leading strategic Smart Manufacturing summit for production executives and plant managers to interactively discuss the future of smart factories, advanced production strategies, factory automation, organisational change, data management, predictive maintainance, robotics, cost reduction, lean & operational excellence, Industry 4.0 and Workforce 4.0., lecture by Stefanie Brickwede.

29.-31.01.2019 – ISAM 2019

3rd International Symposium Additive Manufacturing (ISAM 2019)

Fraunhofer IWS, Link to the event: https://www.isam.network/

January 29–31, 2019, Dresden

“We are pleased to invite you to the 3rd International Symposium Additive Manufacturing on January 29–31, 2019 in Dresden.

Additive manufacturing is currently paving its way into various applications at outstandingly high speed. Fascinating engineering solutions paired with exciting economical benefits are strong drivers for R&D efforts worldwide. Fraunhofer IWS Dresden is a proud pacemaker in additive manufacturing solutions for industry.

The 3rd International Symposium on Additive Manufacturing brings together the world leading experts in additive manufacturing and newcomers interested in this fascinating and vibrant field. Ample time for discussion and networking is making this event a great marketplace for new ideas and business in additive manufacturing. Do not miss this opportunity!”

Livestream on: http://bit.ly/Fraunhofer_IWS